2002 Ford Windstar Intake Manifold Lower Removal
download CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages,...
View Article1994 Ford Mustang Dual Converter and Pipe 5.0L Engine Removal Installation
download 5.0L Engine Removal 1. Raise vehicle. Refer to Section 00-02. 2. Disconnect air inlet tube (5F235) from the dual converter and pipe. 3. Remove dual converter and pipe to exhaust manifold...
View Article2000 Ford Windstar Intake Manifold Lower Removal Installation
download 1. Partially drain the cooling system. For additional information, refer to Section 303-03. 2. Remove the upper intake manifold (9424). For additional information, refer to Intake...
View Article2001 Lincoln LS Intake Manifold Removal
download 1. Disconnect the battery ground cable. For additional information, refer to Section 414-01. 2. Remove the air cleaner outlet tube. For additional information, refer to Section 303-12. 3....
View Article1999 Ford Crown Victoria Intake Manifold Gasoline Engines Removal
download 1. Disconnect the battery ground cable. For additional information, refer to Section 414-01. 2. Drain the engine cooling system. For additional information, refer to Section 303-03. 3. Remove...
View Article2002 Ford F-150 Fuel Injection Supply Manifold Removal Installation
download Installation All engines 1. NOTE: Lubricate the new O-ring seals with clean engine oil to aid installation. Install new O-ring seals, as required. 2. Install the fuel injectors into the fuel...
View Article2001 Ford F-150 Engine Removal
download All vehicles 5. Remove the radiator. For additional information, refer to Section 303-03A. 6. If equipped, remove the A/C condenser core. For additional information, refer to Section 412-03....
View Article2000 Ford Crown Victoria Intake Manifold Gasoline Engines Removal
download Removal 1. Disconnect the battery ground cable. For additional information, refer to Section 414-01. 2. Drain the engine cooling system. For additional information, refer to Section 303-03. 3....
View Article1998 Ford Taurus Cylinder Heads Removal
download 1. Rotate crankshaft (6303) to zero degrees top dead center (TDC) on the compression stroke. 2. Disconnect battery ground cable (14301). 3. Drain engine cooling system. Refer to Section 03-03....
View Article2005–2006Toyota Tacoma EXHAUST TICKING NOISE
download Some customers may experience a ticking or tapping–type noise from the engine area at 2000 – 2500 rpm during acceleration that is most noticeable after a cold soak. New exhaust manifolds have...
View Article
